Fountain

A beautiful cast aluminium upright fountain, inspired by an older design. It is very solid and weighs 4.5kg. The item is delivered unassembled in a box - you just have to screw the parts together. This is very easy to do and only takes a few minutes. The tap is of course also included. The dimensions are as follows: Height 2’5.9", width 17.3”, depth 9.4” (76x44x24cm). The inner circumference of the pipe at the back of the tap is 19mm i.e. BSP size 3/4. The basin has a drain hole with an inner diameter of 1.5” (38mm). The distance from the hole for the tap to the drain hole is 17.3” (44cm). The distance from the hole for the tap to the top of the basin is 10.2” (26cm). The distance from the hole for the tap to the top of the fountain is 7.5 (19cm).

Beautiful solid state fountain of aluminum according to an old produced model. The supplied water tap is made of brass, this has a 3/4 inch connection. As seen in the photos, a high quality and decorative work in antique style. By consuming handwork of products traditionally processed to obtain an antique appearance. This has the consequence that a patina or signs of age are deliberate. Each object thus has slight variations. The dimensions are as follows: 24 x 73 x 30cm (W x H x D), weight is 5kg. The distance between the connection point of the tap and the bottom of the basin is 48cm. The column and the lower part are hollow inside, so that the water connection from below is possible. Other visible objects serve for size comparison only and are not included in purchase.

Stunning solid fountain made from cast aluminium, inspired by an antique design. As you can see in the photos, this is a premium-quality ornamental piece. The dimensions are as follows: Width 44cm, height 72cm, depth 22cm, weighing a total of 4kg. The inner circumference of the pipe at the back of the tap is 21mm i.e. BSP size 3/4. The tap is included in delivery. The distance between the connection point of the tap and the bottom of the basin is 55cm. On the side there are 4 holes which can be used to drill the piece to the wall. Other visible objects serve for size comparison only and are not included in purchase.

Beautiful sink cast aluminum prepared according to traditional standards. The supplied water tap is made of brass, this has a 3/4 inch connection. As seen in the photos, a high quality and decorative work in antique style. By consuming handwork of products traditionally processed to obtain an antique appearance. This has the consequence that a patina or signs of age are deliberate. Each object thus has slight variations. The dimensions are as follows: width 42.5 cm, height 72cm, depth 22.5cm, the weight is 4.1 kg. The distance from the port of the faucet to the bottom is 54,5cm. Laterally, further 4 holes for mounting on the wall yet. The decoration is only for size comparison and is not part of the offer.

Exquisite wall fountain made from solid iron, inspired by an antique design. Vintage design with an antique patina, recreated by hand. This is a solid piece, weighing kg. The tap is of course also included. The dimensions are as follows: height ", width ", depth " (56x x cm) The inner circumference of the pipe at the back of the tap is 19mm i.e. a 3/4 inch fitting. There is a drain hole at the base with a diameter of 0.9" (23mm). The chair serves for size comparison only and is not included in purchase.

Exquisite wall fountain made from solid iron, inspired by an antique design. Vintage design with an antique patina, recreated by hand. This is a solid piece, weighing kg. The tap is of course also included. The dimensions are as follows: height 23.5", width ", depth " (60x x cm) The inner circumference of the pipe at the back of the tap is 19mm i.e. a 3/4 inch fitting. There is a drain hole at the base with a diameter of 0.9" (23mm). The chair serves for size comparison only and is not included in purchase.

Beautiful standing fountain made from solid iron, inspired by an old design. Vintage design with an antique patina, recreated by hand. This is a solid piece, weighing 11kg. The item is delivered unassembled in a box - you just have to screw the parts together. This is very easy to do and only takes a few minutes. The tap is of course also included. The dimensions are as follows: height 2’1", width 12.5", depth 11" (64x32x28cm) The inner circumference of the pipe at the back of the tap is 19mm i.e. a 3/4 inch fitting. There is a drain hole at the base with a diameter of 0.9" (23mm). The round drain cover, which can be seen in the photos, can be removed. The height from the middle of the tap to the drain cover at the bottom is 17" (44cm). The chair serves for size comparison only and is not included in purchase.

Beautiful standing fountain made from solid iron, inspired by an old design. Vintage design with an antique patina, recreated by hand. This is a solid piece, weighing 11kg. The item is delivered unassembled in a box - you just have to screw the parts together. This is very easy to do and only takes a few minutes. The tap is of course also included. The dimensions are as follows: height 2’1", width 12.5", depth 11" (64x32x28cm) The inner circumference of the pipe at the back of the tap is 19mm i.e. a 3/4 inch fitting. There is a drain hole at the base with a diameter of 0.9" (23mm). The round drain cover, which can be seen in the photos, can be removed. The height from the middle of the tap to the drain cover at the bottom is 17" (44cm). The chair serves for size comparison only and is not included in purchase.

Exquisite wall fountain made from solid iron, inspired by an antique design. Vintage design with an antique patina, recreated by hand. This is a solid piece, weighing 16kg. The item is delivered unassembled in a box - you just have to screw the parts together. This is very easy to do and only takes a few minutes. There are pre-drilled holes to the top right and left of the fountain for mounting. The tap is of course also included. The dimensions are as follows: height 2’2", width 15", depth 9" (66x38x23cm) The inner circumference of the pipe at the back of the tap is 19mm i.e. a 3/4 inch fitting. There is a drain hole at the base with a diameter of 1" (25mm). The height from the middle of the tap to the drain hole at the bottom is 18.5" (47cm). The chair serves for size comparison only and is not included in purchase.

Exquisite wall fountain made from solid iron, inspired by an antique design. Vintage design with an antique patina, recreated by hand. This is a solid piece, weighing 16kg. The item is delivered unassembled in a box - you just have to screw the parts together. This is very easy to do and only takes a few minutes. There are pre-drilled holes to the top right and left of the fountain for mounting. The tap is of course also included. The dimensions are as follows: height 2’2", width 15", depth 9" (66x38x23cm) The inner circumference of the pipe at the back of the tap is 19mm i.e. a 3/4 inch fitting. There is a drain hole at the base with a diameter of 1" (25mm). The height from the middle of the tap to the drain hole at the bottom is 18.5" (47cm). The chair serves for size comparison only and is not included in purchase.

A beautiful cast aluminium basin, manufactured in the nostalgic style. The sides are adorned with grape motifs. As you can see on the photos, this is a truly ornamental item. Naturally, it comes with a tap. The dimensions are as follows: height 61cm, width 37cm, depth 21cm, weight 2.8kg The inner circumference of the pipe at the back of the tap is 19mm and has a 3/4 inch fitting.

A beautiful wall fountain made from cast aluminium in the nostalgic style. It is very solid and weighs 4.5kg. The item is delivered unassembled in a box - you just have to screw the parts together. This is very easy and is done within a few minutes. Naturally, it comes with a tap. The dimensions are as follows: 44 x 76 x 24cm (W x H x D). The inner circumference of the pipe at the back of the tap is 19mm and has a 3/4 inch fitting. The basin has a drain hole with an inner diameter of 38mm. The distance from the hole for the tap to the drain hole is 44cm.

Magnificent very small sink made of cast iron in a nostalgic style. As can be seen laterally decorative ornaments with grapes. It is a massive and heavy piece, the tap is attending. The pool has a small opening down, so the water can drain. Here no drain pipe can be connected, it is only a small hole. In the event that you want to seal it, connect the opening easily with silicone. Please note that this is a very small sink. In my other listings, see this style in antique white, and larger sinks. The dimensions are as follows: height 40cm, width 25cm, depth 14cm. Weight 3.6kg.

Beautiful solid state fountain of aluminum according to an old produced model. The supplied water tap is made of brass, this has a 3/4 inch connection. As seen in the photos, a high quality and decorative work in antique style. By consuming handwork of products traditionally processed to obtain an antique appearance. This has the consequence that a patina or signs of age are deliberate. Each object thus has slight variations. The dimensions are as follows: 29 x 78 x 35cm (W x H x D), weight is 15kg. The distance between the connection point of the tap and the bottom of the basin is 57cm. The column and the lower part are hollow inside, so that the water connection from below is possible. Other visible objects serve for size comparison only and are not included in purchase.

Beautiful massive fountain spout made of iron. As seen in the photos, a high quality and decorative work in antique style. By consuming handwork of products traditionally processed to obtain an antique appearance. This has the consequence that a rust patina or signs of age are deliberate. Each object thus has slight variations. The dimensions are as follows: 21 x 21 x 23cm (W x H x D). Inside diameter 2cm. The weight is 3kg.

Beautiful standing fountain made from solid iron, inspired by an old design. Vintage design with an antique patina, recreated by hand. This is a solid piece, weighing 11kg. The item is delivered unassembled in a box - you just have to screw the parts together. This is very easy to do and only takes a few minutes. The tap is of course also included. The dimensions are as follows: height 2’1", width 12.5", depth 11" (64x32x28cm) The inner circumference of the pipe at the back of the tap is 19mm i.e. a 3/4 inch fitting. There is a drain hole at the base with a diameter of 0.9" (23mm). The round drain cover, which can be seen in the photos, can be removed. The height from the middle of the tap to the drain cover at the bottom is 17" (44cm). Other visible objects serve for size comparison only and are not included in purchase.

A beautiful cast aluminium basin, manufactured in the nostalgic style. The sides are adorned with grape motifs. As you can see on the photos, this is a truly ornamental item. Naturally, it comes with a tap. The dimensions are as follows: height 61cm, width 37cm, depth 21cm, weight 2.8kg. The inner circumference of the pipe at the back of the tap is 21mm and has a 3/4 inch fitting.

A beautiful cast aluminium basin, manufactured in the nostalgic style. The sides are adorned with grape motifs. As you can see on the photos, this is a truly ornamental item. Naturally, it comes with a tap. The dimensions are as follows: height 61cm, width 37cm, depth 21cm, weight 2.8kg The inner circumference of the pipe at the back of the tap is 21mm and has a 3/4 inch fitting.

A beautiful cast aluminium upright fountain with basin, inspired by an older design. This is a solid piece. It weighs 10kg. The item is delivered unassembled in a box - you just have to screw the parts together. This is very easy to do and only takes a few minutes. The tap is of course also included. The dimensions are as follows: height 2’6", width 14", depth 13" (76x36x33cm) The inner circumference of the pipe at the back of the tap is 19mm i.e. a 3/4 inch fitting. There is a drain hole at the base. The round drain cover, which can be seen in the photos, can be removed. The distance between the tap and the drain cover is 20" (51cm). Other visible objects serve for size comparison only and are not included in purchase.

Beautiful sink cast aluminum prepared according to traditional standards. The supplied water tap is made of brass, this has a 3/4 inch connection. As seen in the photos, a high quality and decorative work in antique style. By consuming handwork of products traditionally processed to obtain an antique appearance. This has the consequence that a patina or signs of age are deliberate. Each object thus has slight variations. The dimensions are as follows: 35 x 59 x 18cm (W x H x D), the weight is 3.8 kg. The distance from the connection of the water tap to the bottom is 45 cm. Laterally, further 4 holes for mounting on the wall yet. The decoration is only for size comparison and is not part of the offer.

A beautiful cast aluminium upright fountain, inspired by an older design. The fountain is solid piece, weighing approximately 7kg. The item is delivered unassembled in a box - you just have to screw the parts together. This is very easy to do and only takes a few minutes. The tap is of course also included. The dimensions are as follows: height 2’9", width 16", depth 13" (83x40x33cm). The distance from the top to the tap is 7.5" (19cm). The distance between the drain grate and middle of the tap is 23.5" (59cm). The distance from the bottom of the fountain to the middle of the tap is 25.5" (64.5cm). The inner circumference of the pipe at the back of the tap is 21mm i.e. a 3/4 inch fitting. There is a drain hole at the base with a diameter of 2" (52mm). The round drain cover, which can be seen in the photos, can be removed.

Beautiful sink cast aluminum prepared according to traditional standards. The supplied water tap is made of brass, this has a 3/4 inch connection. As seen in the photos, a high quality and decorative work in antique style. By consuming handwork of products traditionally processed to obtain an antique appearance. This has the consequence that a patina or signs of age are deliberate. Each object thus has slight variations. The dimensions are as follows: width 44cm, height 72cm, depth 22.5cm, weight is 4kg. The distance from the port of the faucet to the bottom is 54,5cm. Below the pool is centrally a drain hole with a diameter of 38mm available. Laterally, further 4 holes for mounting on the wall yet. The decoration is only for size comparison and is not part of the offer.

Beautiful sink cast aluminum prepared according to traditional standards. The supplied water tap is made of brass, this has a 3/4 inch connection. As seen in the photos, a high quality and decorative work in antique style. By consuming handwork of products traditionally processed to obtain an antique appearance. This has the consequence that a patina or signs of age are deliberate. Each object thus has slight variations. The dimensions are as follows: width 44cm, height 72cm, depth 22cm, weight is 4kg. The distance from the port of the faucet to the ground is 55cm. Below the pool is centrally a drain hole with a diameter of 38mm available. Laterally, further 4 holes for mounting on the wall yet. The decoration is only for size comparison and is not part of the offer.

Beautiful solid state Fountain of aluminum produced by traditional standards. As seen in the photos, a high quality and decorative work in antique style. By consuming handwork of products traditionally processed to obtain an antique appearance. The dimensions are as follows: width 23cm, height 93cm, depth 23cm, weight is 5.5kg. The distance from the port of the enclosed water tap to the bottom is 78cm. The inside diameter of the pipe behind the tap is 19mm, so it's a 3/4 inch connection. The faucet is included. The column and the lower part are hollow inside, so that the water connection from below is possible. There are 2 holes for fastening to the floor available.